Search Catalog:   GO
homepageClick Here To Place Ordercontactsitemap
DCC logoDCC logo
 
   
 

HotSpot I
Thermocouple Welder


HotSpot II
Thermocouple Welder
 HotSpot PLUS Capacitive Discharge Welder Thermocouple
Fundamentals
 

Why CD Welders?   


Welder Expansion Kits

Welder Accessories

HotMux
Thermocouple
Data Logger

Data Logger
Accessories


Thermocouple Wire

HotSpot Users

Ultralight Aircraft

 


 HotSpot PLUS Capacitive Discharge Welder

HotSpot PLUS

 


 

See video


The HotSpot PLUS is the newest member of DCC's HotSpot Capacitive Discharge welder family. The principal difference between the HotSpot PLUS and the HotSpot II is its heavier welding capability. The HotSpot PLUS is designed to handle the attachment of heavy wires. light gauge studs and weldable pins to metal surfaces. It can also close larger tubes than the HotSpot II unit and aid in wire harness attachment and in insulation blanket installation.

The HotSpot PLUS operates only from AC power. A battery-powered version of the unit is not offered. It weighs only 15 lbs. and it's compact design makes it a very portable package.

QUICK ACTION The HotSpot PLUS is light and portable so you can move it right to where you need to weld pins and attach thermocouples. The actual welding time in less than a second and the short recycle interval, even at full power, will allow you to make 6 or more welds a minute, even quicker for ordinary gauge thermocouples.

EASY-TO-USE Anyone can quickly become proficient in the use of the HotSpot PLUS. While sophisticated internally, the HotSpot PLUS provides the operator with a firing button and a simple on/off and energy level adjustment. The dual capability of pin thermocouple welding makes the HotSpot PLUS particularly attractive for applications currently employing stud welders and thermocouple attachment units. At $1,250, it is a money saver.

FLEXIBLE The HotSpot PLUS welder is a dual range high-energy unit that has the versatility to provide fine control as well as the high power capability needed for heavier welds. Front panel indicators and controls allow the operator to easily monitor the status, set the energy level, and initiate a weld cycle.
 
  DCC Corporation | 7250-B Westfield Ave. Lower Level | Pennsauken, NJ 08110 | 856-662-7272